7
English
ASSEMBLY
Kaasa 255 mm weighs a total of 3 kg and Kaasa 475 mm weighs 17 kg, and the
product should be assembled where it is to be used. Place the metal base (2) on a firm
surface. Then fit the protective glass (3) in place inside the ring/pins. Finally place the
glass dome (1) around the protective glass outside the ring. Take care when moving
glass parts that break easily, and avoid hitting the parts against each other. When
handling your Kaasa product it is recommended that you wear protective gloves to
avoid leaving fingerprints on the surface. When moving it from one place to another,
each part should be moved separately. The protective glass may only be removed after
the dome has been removed from the base.
Figure 3. Kaasa 255 mm assembly.
Figure 4. Kaasa 475 mm assembly.
HOT PARTS
The glass dome and the protective
glass get hot when Kaasa is lit. Do not
touch the hot parts. The flame may
briefly extend above the top of the
protective glass.
Figure 5. Hot parts.
SAFE DISTANCES
Kaasa must be placed at a safe
distance (at least 0.5 m) from walls,
curtains, ceilings and all furnishings
as well as other flammable materials,
such as fuel.
Figure 6. Safe distances.
Kaasa_manual_2.indd 7
5.5.2011 10:53:40
