Important Setup Advice
∞
Power Line Adapter (PLA) units may only be used on the same electrical circuit in a home. Most homes
typically have one circuit for lighting and another for electrical outlets, but large homes may have two
circuits for electrical outlets.
∞
Using a double adaptor or a power board in your setup is
not recommended.
∞
Each PLA unit requires at least 5cm clearance below the power socket to allow for an ethernet cable. It is
not suitable for very low mounted wall sockets.
Setting up with a Power Line Adapter
Your two Power Line Adapter units are already paired with each other. If you run into any issues, check out our
handy online guides by searching “power line adapter” at:
iinet.net.au/iihelp
PLEASE NOTE:
You can use a Power Line Adapter to connect any ethernet-compatible device;
we’ve shown you an iiNet TV with Fetch set top box as an example.
