iiNet ADSL2+ Modem User Manual Download Page 51

Page: 51 / 55

Appendices

Appendix C Specifications
Standards Compliance
CE Mark
Emissions

FCC Class B, VCCI Class B

Industry Canada Class B

EN55022 (CISPR 22) Class B

C-Tick - AS/NZS 548 (995) Class B

Immunity

EN 6000--2/

EN 6000-4-2//4/5/6/8/

Safety

UL 950

EN60950 (TÜV)

CSA 22.2 No. 950

IEEE 802. 0 BASE-T Ethernet

IEEE 802.u 00 BASE-TX Fast Ethernet

Modem Standards

ITU G.992. (G.dmt)

ITU G.992.2 (G.lite)

ITU G.994. (G.handshake)

ITU T.4 issue 2 - ADSL full rate

G.992. (ADSL2)

G.992.5 (ADSL2+)

G.992.5M (ADSL2+M)

LAN Interface

RJ-45 0 BASE-T/00 BASE-TX ports

Auto-negotiates the connection speed to 0 Mbps Ethernet or

00 Mbps

Fast Ethernet, and the transmission mode to half-duplex or

full-duplex

USB Interface

USB port (FPI20ENau only)

WAN Interface

ADSL RJ- port

FXO Interface

FXO port

FXS Interface

2 FXS ports

Indicator Panel

Line, Phone -2, VoIP, USB (FPI20ENau only), LAN -4 (4 port

FPI24ENau & FPI24ENau only), WLAN (FPI24EGau only),

Online, ADSL, PWR (power)

Dimensions

6 x 20 x 90 mm (0.6 x 4.2 x .48 in.)

Weight

60g (.6 lbs)

Input Power

.2V .20 A

Power Consumption

2.52 Watts maximum

Management

Web management

Advanced Features

VoIP-QoS, VAD, call waiting, call forwarding, caller ID, jitter buffer.

Codecs supported - G. U/A law, G.29, G.2.

Dynamic IP Address Configuration – DHCP, DNS, DDNS

Firewall – Client privileges, hacker prevention and logging,

Stateful Packet Inspection

Virtual Private Network – PPTP, IPSec pass-through, VPN

pass-through

Internet Standards

RFC 826 ARP, RFC 9 IP, RFC 92 ICMP, RFC 68 UDP, RFC

9 TCP, RFC 8 TFTP, RFC 48 AAL5 Encapsulation, RFC

66 PPP, RFC 866 HTML, RFC 2068 HTTP, RFC 264 PPP

over ATM

Temperature

Operating 0 to 40°C (2 to 04°F)

Storage -40 to 0°C (-40 to 58°F)

Humidity

5% to 95% (non-condensing)

Summary of Contents for ADSL2+ Modem
























































Search results

Summary of Contents for ADSL2+ Modem

Reviews:

Brands by name

Popular brands

iiNet ADSL2+ Modem, User Manual

Search results

Summary of Contents for ADSL2+ Modem

Reviews:

Brands by name

Popular brands