Flight Plan
Sequencing
The GX50 will automatically sequence from one leg to the next as you fly past each
waypoint. A line that evenly divides (bisects) the angle between the two legs determines
when the flight plan sequences to the next leg. In the example below, the dashed line
describes the area where the flight plan will sequence from Leg 1 to Leg 2 and for the last
waypoint (Wpt 3).
Flight Plan Leg
Information
Two types of information are available within flight plan legs: waypoint and flight
information. Pressing INFO will provide information about the destination waypoint.
Information about the ETA, ETE, Ground Speed, and Fuel is also available for each leg
by selecting which option you like to view in the leg display.
1. While viewing a flight plan leg, press SEL. The From waypoint field will flash.
Chg?
to SLE
1
353° 48.0nm
arpt
arpt
2. Turn the Large knob clockwise two clicks to choose the third line for selection. The
line will flash.
EUG
to SLE
1
353° 48.0nm
arpt
arpt
3. Turn the Small knob to choose from the list of available leg information options. The
options are described on the following pages.
EUG
to SLE
1
353° 48.0nm
Leg ETE 00:30
4. Press ENTER to keep your choice displayed or press SEL to cancel viewing and
return to the Bearing and Distance information.
24
Flight Plan Functions
WPT 2
WPT 3
Leg 1
Leg 2
WPT 1
FROM
FROM
TO
Angle
Bisector
Angle
Bisector
FROM
TO
SEL
SEL
ENTER
Summary of Contents for Apollo GX 50
Page 37: ......
Page 38: ...II MORROW V I S I O N A R Y T H I N K I N G T O D A Y ...
