Ihse kvm-tec KT-6014, User Manual

Page: 80 / 84

80 | kvm-tec
Misprints, errors and technical changes reserved Misprints, errors and technical changes reserved
8.1 REQUIREMENTS FOR CAT5E/6/7 CABLES
A Cat5e/6/7 cable should meet the following requirements:
• The pins are connected 1:1.
Caution: the cable pairs must be twisted to EIA/TIA- 568A (rare)
or EIA/TIA-568 B (common) pairs.
• Erroneous assignments cannot be found with a simple cable tester.
• The pins for the green pair of wires are not adjacent to one other.
• The cable must at the very least meet the CAT5 specifications and be suitable for Gigabit
transmission.
• The cable should meet one of the following standards: Class D ISO/IEC 11801:2002
or EN 50173-1:2002. Schema EIA/TIA-568 B.
• Only use shielded installation cable with min. cross section of 24 AWG throughout
the length.
• The shield should be contiguous and connected to both ends. A shielded patch cable is
allowed for connection to the device.
Schema EIA/TIA-568 B
8. REQUIREMENTS FOR CABLE
Pin Color
1 Orange /White
2 Orange
3 Green /White
4 Blue
5 Blue /White
6 Green
7 Brown /White
8 Brown