manualshive.com logo in svg

Ihse KT-6021L, User Manual, Page: 17 / 37

Share
Download
Ihse KT-6021L User Manual Download Page 17

32    |    kvm-tec

kvm-tec    |    33

Misprints, errors and technical changes reserved

Misprints, errors and technical changes reserved

3. EXTENDER SETTINGS

3. EXTENDER  SETTINGS

As soon as a connection to the partner has been established, the test can be started with the 
„Enter“ key or the arrow key on the right „

→“

.

After a valid synchronization process, the test is started and the test run time and errors are 
displayed. 

The test can be ended at any time by pressing the “Enter” or “

→

” key. If no error has occurred, 

the status reports: “Test OK! If errors occurred during the test, the status displays the sum of all 
errors that occurred.

3.5 DDC MENU

The DDC Information menu allows the user to specify which DDC information is used by the PC. 

 

Definition of the DDC information used by the PC:

 

1. make sure that the 

main menu

 is open. 

 

2. Press the 

D

 button and the 

DDC option menu

 will be displayed.

 

- Press 

1

 to display the DDC information of the monitor connected to the remote (CON) 

 

Extender is connected.

 

- Press 

2

 to save the current DDC information. The system will  

 

applies the same settings after restarting the Extender

 

- Press the keys 

4

 to 

8

 to use a predefined resolution, which is saved.

 

3. press 

ESC

 to return to the main menu

 

 
 

Summary of Contents for KT-6021L






































Reviews:

No comments