Configuration
2015-03-05
21
5.4
USB-HID Ghosting
This function allows storing the specific keyboard and mice descriptors
(device descriptions) into the CPU unit. This permanent storage prevents
the registration and deregistration process of keyboard and mouse on an
operating system each time, if there is a shared use of a source
(computer, CPU) by two or more consoles within a KVM matrix.
The following table lists the keyboard commands for the configuration of
USB-HID Ghosting:
Function
Keyboard Command
Writing the device descriptions of
the input devices connected to the
CON Unit into the CPU Unit.
Activating the emulation in the
CPU Unit.
<'Hot Key'>, <h>, <w>, <Enter>
Activating the emulation of
already stored device descriptions
in the CPU Unit
<'Hot Key'>, <h>, <e>, <Enter>
Deactivating the emulation of
active device descriptions in the
CPU Unit. The input devices
connected to the CON Unit will be
now passed transparently to the
source (computer, CPU).
<'Hot Key', <h>, <d>, <Enter>
Deactivating the emulation of
active device descriptions in the
CPU Unit. Deleting the
descriptions out of the CPU Unit.
The input devices connected to
the CON Unit will be now passed
transparently to the source
(computer, CPU).
<'Hot Key', <h>, <r>, <Enter>
Pos : 33 / 806-IHSE/ Konfig urati on/474_Konfig urati onsdat ei/ 474- xx @ 7\ mod_1331801555639_6.doc @ 58172 @ 2 @ 1
