DVXI/ME-XM /-XS DVI- MEDIA-EXTENDER
DVXI/ME-XM /-XS DVI- MEDIA-EXTENDER
DVXI/ME-XM /-XS DVI- MEDIA-EXTENDER
manual : http://www.ihse.de/pdf/b466-xx_e.pdf
manual : http://www.ihse.de/pdf/b466-xx_e.pdf
manual : http://www.ihse.de/pdf/b466-xx_e.pdf
3.1 Diagnostic LEDs
Each DVXi/ME Media-Extender is fitted with four indicator LEDs:
Power, Video OK, Data Error,
Link Status
: The
Power
LEDs are next to the Power socket.
The location of the LEDs is shown below:
Diagnostic - LEDs at DVXi/ME - Extender
LED
Appearance
Diagnostics
Power LED
(Red LED)
Off
On
Device not ready
Device ready
Video Okay
(Green LED)
Off
On
No or invalid video signal detected
Device ready
Link Status
(Green LED)
blinking
On
No fibre connection
Device ready
Data Error
(Red LED)
Off
blinking / On
Device ready
Errors through data transmission over fibre Cable
(Cable too long, too high attenuation or too much
EMI interferences )
4 Audio/serial option
No setting up or user adjustments are required. Please note that on the dual access model, the serial
link is always active Please bear in mind that the Remote Unit’s serial port is wired as DTE (i.e. the
same as that on a PC). To connect a serial printer (or other DTE rather than DCE device) to the
Remote Unit, you will need a Null-Modem (crossover) cable between the Remote Unit and the
printer. Select Xon/Xoff software flow control on the printer and PC. A serial Touchscreen may be
plugged directly into the Remote Unit.
5 Troubleshooting
Monitor
There isn’t a picture.
Check the power supply connection at the Local and Remote unit. Is the
Power
(Red
LED) at the Local and Remote unit illuminated? If not, the internal power-supply may be
damaged or there may be an internal error.
Check that the Interconnection cable is connected at the Local Unit and the Remote Unit.
Is the
Link Status
LED illuminated? If not, there may be a problem with the
Interconnection cable:
Are there
Errors through data transmission over fibre Cable (Cable too long, too high
attenuation or too much EMI interferences )? Is the
Data Error
LED illuminated or
blinking? If yes, check cable length and environment.
Video Okay
LED is dark: CPU does not provide a video signal – Check settings of the
graphic card. Try out, connecting a monitor to the local output, to see, whether there is a
signal or not.
DVXi/ME-xM /-xS
DVI-Media-Extender
Type:
K466-0M
K466-AM
K466-0S
K466-AS
K467-0M
K467-AM
K467-0S
K467-AS
K468-0M
K468-AM
K468-0S
K468-AS
(Quick Setup)
Diagnostic LED
Power
Diagnostic LED
Video OK
Diagnostic LED
Data Error
Diagnostic LED
Link Status
