CE declaration of conformity
declaration of manufactorer
This Equipment complies with the requirements of the European EMC directive 89/336 EEC in
respect of EN55022 Class B, EN50082-1 and EN 60555-2 and the Low Voltage Directive.
This equipment has been found to comply with the limits for a Class A digital device, pursuant to
Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against
harmful interference when the equipment is operated in a commercial environment. This
equipment generates, uses, and can radiate radio frequency energy and, if not installed and
used in accordance with the instruction manual, may cause harmful interference to radio
communications. Operation of this equipment in a residential area is likely to cause harmful
interference in which case the user will be required to correct the interference at his own
expense.
Disclaimer
While every precaution has been taken in the preparation of this manual, the manufactorer
assumes no resposibility for errors or omissions. Neither does the manufacturer assume any
liability for damages resulting from the use of the information contained herein. The manufacturer
reserves the right to change the specifications, functions, or circuitry of the product without
notice.
The manufacturer cannot accept liability for damage due to misuse of the product or due to other
circumstances outside the manufacturer’s control. And the manufacturer will not be responsible
for any loss, damage, or injury arising directly or indirectly from the use of this product.
IHSE by Scanmagnetics Oy • Helsinki • Finland
• www.scanmagnetics.com • [email protected] • Tel. +358-9-271 2200
revision: January, 2004
DAVX - dig. A/V-Extender
32
CE declaration of conformity
