Operation
2011-02-23
35
6 Operation
Pos: 24 /806-IHSE/Betrieb/Optimierung der Bildeinstellungen/238-5v-xx @ 5\mod_1291802177308_6.doc @ 46141 @ 2333
6.1
Optimization of Picture Settings
All common video modes are pre-installed in an internal table of the
Media- / DVI-Converter. If the input signal corresponds to one of these
video modes, the signal will be automatically detected and the picture will
be displayed.
If picture quality is not satisfying or no picture is displayed, proceed as
follows:
1. Optimize the output settings (see Chapter 6.1.1, Page 36). Thus, the
picture display will be adapted to the properties of the monitor.
2. Optimize the input settings (see Chapter 6.1.2, Page 36). Check if the
automatically detected video mode corresponds to your input signal.
Alternatively, you can manually select the most suitable video mode,
even if you have an unknown input signal.
3. Optimize the picture settings for your input signal (see Chapter 6.1.3,
Page 37).
In some cases it might happen that none of these measurements leads to
a satisfying result. In this case fill in the video mode questionnaire
(
Download
) so that a customer specific video mode can be created.
