Installation
2021-07-07
41
4.2.2 Setup of Upgrade Modules
The modules can be hot plugged.
Upgrade Module Analog Audio / Serial:
1. Connect the audio source to the CPU Unit (e.g. CPU audio output
with audio input, CPU audio input with audio output).
2. Connect the audio output on the CON Unit to headphones or suitable
speakers.
3. Connect the audio input on the CON Unit to a suitable microphone.
Upgrade Module Serial RS422:
1. Connect the CPU to the CPU Unit by using the serial cable.
2. Connect the CON Unit to the serial connector of the input device.
Upgrade Module Digital Audio:
1. Connect the digital audio source to the audio input of the CPU Unit.
2. Connect the audio output of the CON Unit to suitable speakers or
audio amplifiers.
If several active sources are connected, Mini-XLR input takes priority.
The audio signal is available at all outputs.
Upgrade Module Balanced Audio:
1. Connect the digital audio source to the balanced audio input of the
CPU Unit.
2. Connect the audio output of the CON Unit to suitable speakers or
audio amplifiers.
Upgrade Module USB-HID:
1. Connect the CPU to the CPU Unit (USB-HID 2).
2. Connect the USB-HID devices to the CON Unit (Connect to
USB-HID devices 2).
Upgrade Module PS/2:
1. Connect the CPU to a CPU unit with cables for PS/2 devices.
2. Connect the PS/2 devices to the CON unit (Connector to PS/2
devices).