manualshive.com logo in svg

Ihse Draco major K474-U16/C16, User Manual, Page: 98 / 167

Share
Download
Ihse Draco major K474-U16/C16 User Manual Download Page 98

  Draco major 

98 

2011-10-11 

5.5.4 

Touch Screen 

In this menu you can make touch screen specific adjustments. The OSD 
of the Draco major supports the control by a touch screen. 

You have the following possibility to access the menu: 

 

 

 

USB-HID based touch screen protocols are supported.  
Support of manufacturer specific protocols by request. 

 

  Press key <F1>.  

 

 

Menu Configuration – Touch 

 

In this mask you can do the calibration of your touch screen for every 
single console. For this purpose you are required to click at least two 
times at a point at the top left and at the bottom right. After that you will 
have the opportunity to check the calibration, to save it or to abort it. 

The calibration has to be done for every single touch screen at any 
console. 

Summary of Contents for Draco major K474-U16/C16








































































































































































Reviews:

No comments