Product Compliance
This product complies with the essential requirements of the following EC Directives:
Electro-Magnetic Compatibility directive 2004/108/EC
Low Voltage Directive 2006/95/EEC
EC Marking directive 93/68/EEC
Commission Regulation (EU) 2015/1188 Lot 20 and complies with Article 1
Section (g) by denition under Article 2 Section (16) applicable only to indoor
space heating to reach and maintain a certain thermal comfort for human
beings
General Description
In contrast to convection heating, the Infrared Heater Panels Infrared Radiant
Heater heats objects and people rather than the air. As such it is highly eec-
tive for the heating of open spaces and even outdoors providing fresh, clean heat
akin to sunshine. Problems associated with convection heating such as condensation,
temperature laying and dry, stuy air are all but eliminated.
The HIxxxx is a medium intensity heater suitable for ceiling and wall mounting
between 3 and 10 metres. Key features of the heater include:
A highly thermally conductive aluminium emitting plate with a high emissivity
coating to ensure maximum radiant eciency
High temperature metal core, ceramic sheath heating elements
Panel is supplied with an electrical fused plug (with the exception of the
HI3200)
Angle mounting brackets are supplied
The heaters are intended to be controlled by a remote wall mounted thermostat.
The thermostat should be located in the same room on a side wall. Ideally it should
also be above 1.5m above the oor, but not directly under a heater.