NOTE: DIAGRAMS & ILLUSTRATIONS ARE NOT TO SCALE.
INNOVATIVE HEARTH PRODUCTS • LINEAR GAS FIREPLACES • REQUIRED AND OPTIONAL ACCESSORIES
7
Surround mounting
brackets (provided
with surround kit)
Clean
Face Frame
(removed first)
Bezel and Barrier
(added after Surround
- not shown)
One (1) Top non
-combustible
board
Clean
Face Frame
(removed first)
Figure 18 - Remove clean face trim and install brackets
Install optional surround
1. Remove clean face trim and install brackets -
Remove the
clean face frame shown in
Figure 18
.
Attach surround mount-
ing brackets to unit (10 screws)
.
See
Figure 16
.
Surround
will be mounted to these brackets
(see
Figure 17
).
2.
Attach the surround and secure it using the nine (9) screws
provided with the surround kit (
Figure 17
)
.
Finishing with optional Surround and Bezel
1. With unit in framing, secure nailing fl anges to the wall framing.
2. Retrieve and secure heat shield to top front of unit with two
screws.
3. Remove the clean face frame (see
Figure 18
)
.
4. Place insulation fl at across the top of the fi replace lengthwise
behind heat shield.
5. Install top, bottom and two (2) side surround support pieces
with screws from step 1 (see
Figure 18
)
.
6. Cut top noncombustible fi reboard to size and install fl ush with
top frame pieces (side noncombustible boards not used).
7. Install glass media.
8. Remove top, bottom and two side trim pieces of barrier as-
sembly. Insert remaining barrier assembly into bezel assem-
bly and attach with screws.
9. Reinstall the door.
10. Attach surround to surround support with six (6) screws.
11. Hang barrier assembly on door and snap underneath door.
Figure 16 - Surround Mounting Brackets
Figure 17 - Installing optional surround
