Operation
900697-00F 06/2019
Innovative Hearth Products
Altair™ Series Direct-Vent Gas Fireplaces
56
5. Place the middle left log #4 (Figure 54) on the setting pins in the middle of the grate (Figure 50).
6. Place the front left forked log #5 over log #4 as shown in Figure 55. One foot will rest between the 2nd and 3rd
bar from the left on the grate.
Figure 53 - Place log #4
Figure 54 - Place log #5
4
5
Figure 55 - Place log #6
7. The front right forked log #6 will roll back onto log #4 (Figure 56). It has a setting pin which should face out
from the rest of the logs.
8. The upper right forked log #7 is the final log in this process (Figure 57). It rests on the 4th bar, on the setting pin
of log #6 and on log #3.
Figure 56 - Place log #7
6
7
