21
KOS Sub PANEL FUNCTION INTRODUCTION
KOS Sub PANEL FUNCTION INTRUDUCTION
1. Phase
Through this switch, you can switch the output phase
0/180°, and only control the phase of the sound of this
speaker.
2. Volume Control
There are a total of 4 levels of input sensitivity adjustment,
which only control the sensitivity of this product and
supporting KOS Satelite Set. This does not affect the signal
strength of LINKOUT (8).
3. Power
When the machine is powered on, the indicator light is blue,
indicating that the power supply of the machine is normal.
4. SIG/LMIT
When the machine is powered on and there is no power on
signal, the light will not be on. When there is an input signal,
the light will be green. When the machine reaches full
power, the light will be red.
Note: Please avoid the speaker being in the red light state
for a long time!
5. X-OVER
When the switch is selected at 90Hz:
The frequency response of this subwoofer is 35-90Hz (not
affected by the OUTPUT MODE switch).
The frequency range of the output signal of the signal output
interface (8) is 90Hz-20KHz;
When the switch is selected at 120Hz:
The frequency response of this subwoofer is 35-120Hz (not
affected by the OUTPUT MODE switch).
The frequency range of the output signal from the signal
output interface (8) is 120Hz-20KHz.
6. Output Mode
When the switch selects LINK, the signal output (8) outputs
the same signal as the input signal.
When the switch selects X-OVER, the output signal of the
signal output (8) is controlled by the frequency response
selection switch (5).
7. LINE IN
Can be connected to a LINE via an XLR cable.
8. LINE OUT
The output signal can be connected to the signal input
interface of another product through the XLR cable, and the
output signal is the same as the input signal.
9. MAINS LINK
This product uses a POWERCON socket, which can be
connected to the power input interface of another product,
and the output is the same as the input voltage. Plug in the
power cable and turn right to ON to turn the power on, turn
left to OFF to turn it off. Please use the supporting power
cable to connect.
10. MAINS INPUT
This product uses a POWERCON socket. The Applicable
Voltage of is 220-240V~ 50/60Hz.
