19
KOS Satelite Set PANEL FUNCTION INTRODUCTION
KOS Satelite Set PANEL FUNCTION INTRUDUCTIO
KOS Satelite Set PANEL FUNCTION INTRUDUCTIO
1.
Passive speaker signal input:
This is KOS Satelite Set signal input port, please use the
c cable to onnect this port to the output port of KOS Satelite
Set (7).
Note:
1. Please use the supporting wire of this product, otherwise
it will be silent or damage product.
2. This port is limited to using the KOS Satelite Set’s amplifier
signal output.
3. Before connecting KOS Satelite Set, please turn off the
KOS Satelite Set.
1. Power
When the machine is powered on, the indicator light is
blue, indicating that the power supply of the machine is
normal.
2. SIG/LMIT
When the machine is powered on and there is no power on
signal, the light will not be on. When there is an input
signal, the light will be green. When the machine reaches
full power, the light will be red.
3. Volume Control
There are a total of 4 levels of input sensitivity adjustment,
which only control the sensitivity of this product and
supporting passive speakers. This does not affect the
signal strength of LINKOUT (6).
4. DSP Setup
You can choose 4 DSP modes according to the actual use
requirements: see the product combination for details.
5. LINE IN
Can be connected to a LINE via an XLR cable.
6. LINE OUT
The output signal can be connected to the signal input
interface of another product through the XLR cable, and
the output signal is the same as the input signal.
7. Passive Speaker Signal Output
This is KOS Satelite Set signal output port, please use the
cable to connect this port to the input port of KOS Satelite
Set (1).
Note:
1. Please use the supporting wire of this product, otherwise
it will be silent or damage product.
2. This port is limited to using the KOS Satelite Set’s amplifier
signal output.
3. Before connecting KOS Satelite Set, please turn off the
KOS Satelite Set.
8. MAINS LINK
This product uses a POWERCON socket, which can be
connected to the power input interface of another product,
and the output is the same as the input voltage. Plug in the
power cable and turn right to ON to turn the power on, turn
left to OFF to turn it off. Please use the supporting power
cable to connect.
9. MAINS INPUT
This product uses a POWERCON socket. The Applicable
Voltage of is 220-240V~ 50/60Hz.
