9
S N O O Z E A N D D I S P L AY D I M M E R
Snooze duration by default is 9 minutes. Snooze duration is adjusted during
alarm setting (see steps 4-5 on page 8).
1. Press the
Snooze/Display Button
when alarm is sounding to silence the
alarm for the set duration. Snooze can be pressed several times during
alarm cycle (60 minutes).
NOTE
:
When unit is operating on backup battery, press the Snooze/Display
Button to reset the alarm
. The Power/Alarm Reset Button and all other
buttons are disabled in battery backup mode.
2. During normal operation (when alarm is not sounding), press the
Snooze/Display Button
as needed to cycle to the desired brightness level:
High, Low, Min (minimum) and Max (maximum).
3. During normal operation (when alarm is not sounding),
press and hold
the
Snooze/Display Button
for 3 seconds to activate Auto dimming, which
gradually dims the display to off when display is not required. Press any
button to restore the display to the previous brightness level.
Press and
hold
the
Snooze/Display Button
for 3 seconds to switch to manual
dimming mode, then adjust display brightness as described in step 2.
