6
B L U E T O O T H
PAIRING
Pairing establishes a unique communication connection between the unit and
your Bluetooth device. Once paired, you will be able to stream audio
wirelessly to the iZBT5.
1. Turn on your Bluetooth device and make it
“discoverable” by turning on Bluetooth mode
(check in Options or Settings).
2. Press and release the
Power Button
to turn
on the iZBT5.
3.
Press and hold
the
Bluetooth Button
(located
on back of the unit) for 2 seconds. 2 beep tones
will sound and the indicator light on the
Bluetooth button will flash red while the unit
attempts to pair. “iHome iZBT5” should appear
on your device’s menu. Select “iHome iZBT5” on
device to begin/complete pairing. If your device
asks for a password, enter 1234 on the keyboard
of your device. A tone will sound and the red
indicator will glow solid. If no device is paired
within 3 minutes, the unit will revert to its
previous state.
The next time you power on the unit it will
automatically link with the previously paired device
as long as that device is still within range (about 33
feet). To clear/reset Bluetooth, press and hold the
Bluetooth button for 10 seconds until you hear a
long beep.
Note
: Reset is disabled in Sound Therapy
mode.
TIP
: The
iHome Zenergy™ App
works over Bluetooth
using the Bluetooth Low Energy protocol. In use, it
it will appear on your device’s Bluetooth menu as
iZBT5-app. Download it for an enhanced
experience.
iHome iZBT5
