L I ST E N I N G TO YO U R i P h o n e / i P o d
While the dock accommodates most cases, you may need to remove your
case and/or the rubber docking insert for proper docking.
1. Dock your already playing iPhone/iPod. The unit will automatically turn on
and you will hear the music playing from your iPhone/iPod. “DOCK ”will
appear at the bottom of the display, indicating iPhone/iPod playing mode.
2. Press the or
Buttons
on the unit to adjust the system volume.
Note:
If the volume is too low on the iPhone/iPod, the unit may not detect
that the iPhone/iPod is in play mode. Press the
Button
to play it. Press
again as needed to pause and resume play.
3 Press the + or
–
Buttons to go to the next or previous track (hold to scan
backwards or forwards within a track).
4. Press the
Power Button
to turn off the unit. You can also turn the unit off
by undocking a playing device.
Note:
Press the
Mode Button
to cycle from BT to Dock to FM radio to AUX
modes.
L I ST E N I N G TO AU X D E V I C E S
1. Connect the included audio cable plug to the headphone or line-out jack on
your AUX device and the other end to the AUX IN jack located on the back of
the iPLWBT5.
2. Press and release the
Power Button
to turn on the unit, then press and
release the
Mode Button
as needed to cycle through BT, Dock, FM radio and
AUX modes.
3. When AUX mode is selected, turn on your AUX device and use its controls to
play, pause and navigate audio tracks. Adjust the volume on your AUX device
to maximum output.
4. Press the or
Button
on the unit to adjust the system volume.
5. Press and release the
Power Button
to turn off the unit when through
listening. Remember to turn off your AUX device, too.
9
