3
1. Place proper insert for your iPhone or iPod (see insert table on Quick Start Section) in Dock, then gently dock playing
iPhone or iPod. The unit will turn on and you will hear your music. When docked, iPhone or iPod will charge until fully
charged. The iPhone or iPod will not overcharge.
2. If iPhone or iPod is not in play mode, press the
Button
on the iP15 to play your iPhone or iPod. The power on
indicator will light up to show the iP15 is on.
3. Press the or
Button
Volume to adjust the volume.
4. To switch off the unit, press the
Button
again.
Playing and Charging your iPhone/iPod
1. Plug one end of an audio patch cord (
available at www.ihome.com
) into the headphone or line-out jack on your audio
device and the other end of the patch cord into the iP15 Line-in Jack located on the back of the unit.
2. Press the
Button
on the iP15 to play your audio device. The power on indicator will light up to show the iP15
is on. Place your device in play mode.
3. Press the or
Button
to adjust the volume.
4. To switch off the unit press the
Button
again. Remember to turn off your audio device, too.
NOTE
: DO NOT play a line-in device while iPhone/iPod is playing or you will hear both audio sources at once.
Using the Line-in Jack
Color Change Mode
There are 5 color settings. Press the
Color Button
to cycle through them. The settings are: slow color change (default),
fixed color (press the
Color Button
when the desired color is showing to select that color), pulse to music, fast color
change and light off.
