background image

8

Solucionando Problemas

Causa Posible

Síntoma

Solución

La unidad no 

responde 

(no enciende)

El iPod no 

encastra 

correctamente

El iPod no se 

comunica con 

la unidad

El iPod no carga

El sonido sale 

distorsionado

El control remoto 

no funciona

El adaptador de AC no ha sido 

conectado a la corriente eléctrica 

o el cable no ha sido conectado 

a la parte posterior de la unidad.
El tomacorrientes no funciona.

El encastre no es el correcto o no 

ha colocado encastre alguno.

El iPod no está colocado 

correctamente.
El software (programa) de su 

iPod es obsoleto
El iPod está trabado

El iPod no está colocado 

correctamente.
El iPod es de 3ra generación.
El iPod está trabado.
La batería del iPod tiene algún 

problema.
El nivel de volumen está alto
La fuente de sonido está 

distorsionada

Las pilas están descargadas.
El control remoto está fuera del rango

del parlante izquierdo.

Conecte el adaptador AC al tomacorrientes y el cable a la 

ficha de entrada de la unidad.

Conecte otro aparato al  mismo tomacorrientes para 

verificar si se encuentra activo.

Verifique tener el encastre correspondiente antes de 
intentar acoplarlo al aparato.

Retire el iPod de la muesca y elimine la obstrucción. 

Vuelva a acoplar su iPod.
Actualice su programa vía iTunes.

Verifique el correcto funcionamiento de su iPod antes de 

acoplarlo a la unidad. Por favor, refiérase al Manual del 

Usuario de su iPod para mayor información. 
Retire el iPod de la muesca y elimine la obstrucción. 

Vuelva a acoplar su iPod.
El iH64 no soporta iPods de 3ra generación.
Verifique el correcto funcionamiento de su iPod antes de 

acoplarlo a la unidad. Por favor, refiérase al Manual del 

Usuario de su iPod para mayor información.

Si la grabación original de sonido del iPod o MP3 era de 

mala calidad, escuchará ruido/distorsión al ser amplificada 

mediante los parlantes de alta potencia. Intente utilizar 

otra fuente de sonido como la música de un CD.

Coloque pilas nuevas.
Acerque el control remoto al  parlante izquierdo.

Si utiliza un iPod Shuffle o una fuente de sonido externa 

como un iPod de generaciones anteriores, intente bajar el 

volumen del aparato en sí. También puede intentar reducir 

los bajos.

La muesca o el encastre están 

obstruidos.

Retire el iPod de la muesca y elimine la obstrucción. 
Vuelva a acoplar su iPod.

Baje el nivel de volumen. Apague la función EQ/SRS WOW.

Summary of Contents for iH64













Reviews: