iH25 IB 72809.fh10 7/28/09 2:12 PM Page 6
Install/Replace Backup Battery
The iH25 uses a backup battery system to provide continuous alarm operation and clock settings in the
event of a power failure. If the Battery Low Icon located on the left of the display is flashing, it is time to
replace the backup batteries. Please make sure the AC adaptor is connected, otherwise all settings may be
lost during battery replacement.
Open the battery compartment cover located on the bottom of the unit. Insert 1 “CR2032” battery as
indicated.
We recommend the use of alkaline batteries for longer life
.
Batteries information:
•
Do not mix old and new batteries.
•
Do not mix alkaline, standard (carbon -zinc) or rechargeable (nickel-cadmium) batteries.
Replacing iH25 Backup Battery
4
Using the iH25
a)
You can disable the iH25 controls to avoid turning on the device or changing settings while in transit and to save battery life
during extended periods of non-use. To do so, move the
Travel Lock Switch
(located on the back of the unit) to the Locked
icon position. A
Lock Icon
will appear on the display indicating the unit is locked and controls are inactive. Move the switch
to the
Remote
positon to restore normal function with remote control capability, or to the
Off
position to restore function with
the remote disabled.
Using the Line-in Jack
a) An audio patch cord comes with the iH25. Use it to play nondocking iPods or other audio devices through the iH25
Line-
in Jack (one end in the device’s line out or headphones jack, the other in the iH25 line in jack). Make sure there is no iPod
docked in the iH25 when using the line-in jack (however, you can charge shuffle while using line-in). Press the iPod Button.
Using Dimmer
a) Press the
Snooze/Dimmer Button during normal operation to adjust brightness of LCD display.
Using the Travel Lock
Battery install for
Clock display back up
