3
your new mouse
programmable
buttons
programmable
buttons
connect hardware
Gently pull the USB cable from both ends to extend to the
1.
desired length. (Pull again to retract the cable.)
When you first remove the mouse from the
nnte
f
package, approximately 2 in. (5 cm) of the cable
remains between the mouse and the cable reel.
To retract all of the cable into the reel, extend the cable
fully, then grasp the USB connector and mouse so the
cable is pulled tight. With the cable held tight, gently
slide the reel approximately 1 in. (2.5 cm) on the cable
toward the mouse. The cable should now fully retract.
Connect the USB cable to a USB port on your computer.
2.
The drivers for your mouse load automatically.
connect to a
USB port on
your computer
Start using your mouse!
3.
To take advantage of the advanced functions of your mouse,
install the supplied software.
