background image

line-in

am antenna

DC     12V

Tab

Slot

line-in

am antenna

DC     12V

RESETRESET

TESTTEST

iD50 Quick Start

2

4: Updating firmware

1: Power

2: Antennas

Attach AC adaptor cable to DC jack on back of the 
unit and plug the other end into a wall socket. 
Remove the backup battery pull tab from the battery 
compartment on the bottom of the unit.

Uncoil AM antenna cable from antenna frame and plug 
cable into socket on back of unit. Hold base of AM 
antenna in one hand and bend the outer frame around 
towards the base and snap tabs into open slot on base. 
Move antenna 12” away for best reception. Extend FM 
antenna. 

Gently dock your iPad, iPhone or  iPod into  the 30 pin 
dock.  The iPad, iPhone or iPod will charge while docked. 
Press the       

Button

 on the unit to play your iPad, 

iPhone or iPod.  

3: Docking your 

iPad/iPhone/iPod

For best performance, make sure to update the iD50 
firmware. To do so, download the free iHome Set app 
from the App Store. Launch the app, scroll to “Search 
for update” and follow onscreen directions if an update is 
available. NOTE: Firmware updates require a 3G service 
or Wi-Fi network connection. Do not remove your iOS 
device while updating firmware on the iD50.

Note: the iHome Set app is not covered in detail in this 
booklet. Please download the free iHome Set app from 
the App Store and review the Start Guide.

P5

Summary of Contents for iD50


















Reviews: