5
Using Bluetooth: Pairing Your Device
NOTE
: See the iD11 Bluetooth Connection Guide for complete pairing details.
1. Turn on Bluetooth capability on your device and make it discoverable (see your device’s
instructions to add or setup a Bluetooth device).
2. Press and hold the
Play/Pause/Pairing Button
for about 2 seconds to turn the
unit on in Bluetooth mode. The light will alternately flash blue and green while the unit
attempts to pair.
3.
“iD11” should appear in your device’s list of Bluetooth devices; its status display may
indicate “not paired” or “not connected”. Select iD11 to connect. If your device asks for
a password, enter
1234
on the keyboard, keypad or display of your device. If no device
is paired within 3 minutes, the pairing attempt will stop. If this occurs, retry steps 2-3.
4. Once paired with a device, the light will glow steadily blue. There should be an
indication on your device that pairing is complete. On some devices, you must then select
“Use as Audio Device (stereo)” or similar on the device’s Bluetooth menu. Once paired,
your device should link to the iD11 whenever within range.
