P8
7
Troubleshooting
Unit doesn’t respond (no power)
• Check that all connections are correct and properly plugged in. If operating on batteries, make sure
batteries are fresh and are properly installed.
Resetting the unit
If the unit does not respond properly or appears to be “frozen”, you may wish to try resetting it. To do so,
press and hold the
+
and
– Buttons
at the same time for 8 seconds until the unit makes a long beep.
Note: Resetting the unit you erase all current settings. You will have to re-pair any Bluetooth devices.
• Make sure you have the latest firmware for your iPad, iPhone or iPod (update via iTunes if needed).
• Make sure your device is working properly.
For further information and to see the latest instructions,visit
www.ihomeaudio.com/support
1. Remove any docked device from the unit.
2. Press gently on the
Retracting Dock
to store it inside the body of the unit.
3. Place your device sideways in the dock area resting against the back rest.
4.
For Aux-in audio
: Connect audio cable to the device’s headphone jack to the aux in jack on
the back of the unit, and press and release the
Mode Button
to access Aux-in mode (make
sure the
Button
is not lit,indicating iPod/Aux-in mode.
For Bluetooth Audio
: Press and hold the
Button
for 2 seconds to place unit in Bluetooth
mode if unit is off, or press and release the
Mode Button
to toggle to Bluetooth mode (make
sure the
Button
is lit,indicating Bluetooth mode.
5. Play the video on your device.
6. Use the
/
- Buttons
to adjust volume.
7. When done listening, press the
Button
to turn the unit off.
Watching Videos in Landscape Mode
