Playing Audio via Aux In
1. Connect micro USB charging/audio cable to
the Charging/Aux-in USB Port on the side of
the unit and connect the 3.5mm audio plug end
to the headphone or line-out jack on your audio
device.
2. Press and hold the
Power On/Off
Button for 2
seconds to turn the unit ON.
3. Power on the audio device and use the controls
on the device to play or pause audio and to
navigate tracks.
4. Press the
–
or
+
Button to adjust the system
volume. You can also adjust volume on your
device.
5. When done listening, slide the
Power On/Off
Switch to
OFF
turn the unit OFF. Remember to
turn off your device, too.
Using Color Modes
There are six color modes, which you cycle through in this order:
a. Slow Fade (colors slowly fade from one into the next
b. Fast Change (colors change rapidly)
c. One Color (select a favorite color)
d. Pulse to Music (lights flash to the beat of the music)
e. Preset Pulsing (each light array pulses through its own preset pattern of colors)
f. Off (no display)
1. Press and hold the
Power On/Off
Button for 2 seconds to turn the unit ON.
2. Press the
Color Mode
Button repeatedly to cycle to the desired color
mode. For One Color mode, first cycle to Fast Change mode and press the
Color Mode
Button when the desired color appears. For Pulse to Music, make
sure the volume on your connected Bluetooth device is above 50%.
3. When done, slide the
Power On/Off
Switch to
OFF
turn the unit OFF.
8
Using the
iBT90
