background image

11

FCC Information

FCC Radiation Exposure Statement

This equipment complies with FCC RF radiation exposure limits set forth for an 
uncontrolled environment. 

•  Warning: Changes or modifications to this unit not expressly approved by the 

party responsible for compliance could void the user’s authority to operate the 

equipment.

•  NOTE: This equipment has been tested and found to comply with the limits for a 

Class B digital device, pursuant to Part 15 of the FCC Rules.

These limits are designed to provide reasonable protection against harmful 

interference in a residential installation. This equipment generates, uses and can 

radiate radio frequency energy and, if not installed and used in accordance with the 

instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular 

installation. If this equipment does cause harmful interference to radio or television 

reception, which can be determined by turning the equipment off and on, the user is 

encouraged to try to correct the interference by one or more of the following 

measures:
•  Reorient or relocate the receiving antenna.
•  Increase the separation between the equipment and receiver.
•  Connect the equipment into an outlet on a circuit different from that to which the 

receiver is connected.

•  Consult the dealer or an experienced radio/TV technician for help.

CAN ICES-3 (B)/NMB-3(B)

Canada Statement

This device complies with Industry Canada’s licence-exempt RSSs. Operation is 

subject to the following two conditions: 

(1) This device may not cause interference; and 

(2) This device must accept any interference, including interference that may cause 

undesired operation of the device. 

Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux 

appareils radio exempts de licence. L’exploitation est autorisée aux deux conditions 

suivantes : 

(1) l’appareil ne doit pas produire de brouillage; 

(2) l’utilisateur de l’appareil doit accepter tout brouillage radioélectrique subi, 

même si le brouillage est susceptible d’en compromettre le fonctionnement.

The device meets the exemption from the routine evaluation limits in section 2.5 of 

RSS 102 and compliance with RSS-102 RF exposure, users can obtain Canadian 

information on RF exposure and compliance.

Le dispositif rencontre l'exemption des limites courantes d'évaluation dans la 

section 2.5 de RSS 102 et la conformité à l'exposition de RSS-102 rf, utilisateurs peut 

obtenir l'information canadienne sur l'exposition et la conformité de rf.

iBT90

FCC ID:EMOIBT84

   IC:986B-IBT84

This device complies with Part 15 of the FCC Rules, operation is subject to 

the following two conditions: (1) This device may not cause harmful 

interference, and (2) this device must accept any interference received, 

including interference that may cause undesired operation

.

Summary of Contents for iBT90















Reviews: