Pairing is the set-up process to introduce your Bluetooth-capable device to the iBT82. Once your device is paired,
the iBT82 can recognize it and you can play your audio through it.
1. Make sure your Bluetooth device is fully charged. Turn on your Bluetooth device and make it
“discoverable” by turning on Bluetooth mode (check in Options or Settings).
2. Press
and hold
the
Power Button
for 2 seconds to turn on the iBT82. The first time the unit is
powered on, it will enter auto-pairing mode and attempt to connect to a Bluetooth device.
Otherwise, follow step 3 to begin pairing.
3. Press and hold the
Bluetooth Pairing Button
for 2 seconds. The unit will beep twice and the
status indicator LED will flash blue, indicating the unit is in pairing mode.
4. “iHome iBT82” should appear in your device’s Bluetooth menu. If “Not Paired”, “Not Connected” or similar
message appears, select “iHome iBT82” to connect it. If prompted for a passcode, enter “1234” on your
device’s keypad.
6
5. Once pairing is successful, a tone will sound and the Bluetooth indicator light will glow solid blue, indicating
the iBT82 is ready to play music. There should also be an indication on your device. If no device is successfully
paired within 3 minutes the iBT82 will default to previous mode. Once the iBT82 is paired to a device, it will
attempt to autolink when the device is within range (about 30 feet).
Pairing Your Device
For iPhone
iHome iBT82
iHome iBT82
iHome iBT82
iHome iBT82
For other
Using the
iBT82