Left Speaker
Right Speaker
Power ON both
speakers
within 10
seconds for
Wireless
Stereo
Getting Started: First Time Use
Wireless Stereo
Each of your iBT8080 speakers are pre-synced to one
another for Wireless Stereo operation. This sync is
permanent (neither speaker can be synced with a
different or third speaker).
Slide the Power Off/On Switch located on the bottom
of each speaker to ON to turn it on and start Wireless
Stereo link. Tones will sound and each speaker will flash
green while attempting to establish a link. The indicator
on the top of each speaker will glow green when the
Wireless Stereo link is successful and an audio prompt
will identify each speaker as left channel or right
channel. After successful Wireless Stereo linking, the
speakers will enter Bluetooth pairing mode (see below).
After first time power on, user must pair manually (see
page 6).
NOTE: Once speakers are linked, powering OFF one
speaker will also turn the other speaker off. To turn
that speaker back on, move the Power Off/On Switch
to OFF then back to ON.
Wireless Stereo is not working
If Wireless Stereo link fails or does not work, make sure both speakers are
powered on within 10 seconds. If problem remains, turn both speakers off and
reset the Wireless Stereo sync. Please follow the steps below to reconnect both
speakers:
1 Power On one speaker (Slide Power On/Off Switch to ON). The green
cabinet LED will flash.
2 Within 10 seconds, press and hold the Bluetooth Button and Volume "-"
Button at the same time
for 3 seconds. Keep speaker powered on.
3 Repeat above steps with the other speaker and wait for them to
reconnect.
Note: If step 2 is not completed within 10 seconds, please power Off the
speaker and repeat.
6
Using the
iBT8080
