background image

Thank you for purchasing the iHome iBT70. This product is designed to provide high quality wireless 
sound for your iPad, iPhone, iPod, computer, PDA or other Bluetooth audio device.
This instruction booklet explains the basic operation and care of the unit. Please read them carefully and 
keep for future reference.

Maintenance

•  Place the unit on a level surface away from sources of direct sunlight or excessive heat.
• Protect your furniture when placing your unit on a natural wood and lacquered finish. A cloth or other

protective material should be placed between it and the furniture.

• Clean your unit with a soft cloth moistened only with mild soap and water. Stronger cleaning agents,

such as benzene, thinner or similar materials can damage the surface of the unit.

iHome Products, a division of SDI Technologies Inc. (hereafter referred to as SDI), warrants this product to be free from defects 

in workmanship and materials, under normal use and conditions, for a period of one (1) year from the date of original 

purchase.
iHome Products, a division of SDI Technologies Inc. (hereafter referred to as SDI), warrants this product to be free from defects 

in workmanship and materials, under normal use and conditions, for a period of one (1) year from the date of original 

purchase. Should this product fail to function in a satisfactory manner, it is best to first return it to the store where it was originally 

purchased. Should this fail to resolve the matter and service still be required by reason of any defect or malfunction during 

the warranty period, SDI will repair or, at its discretion, replace this product without charge. This decision is subject to 

verification of the defect or malfunction upon delivery of this product to the Factory Service Center authorized by Customer 

Service.
If service is required, please call Customer Service at 1-800-288-2792 to obtain a Return Authorization Number and shipping 

instructions. 

Disclaimer of Warranty
NOTE:

 This warranty is valid only if the product is used for the purpose for which it was designed. It does not cover (i) products 

which have been damaged by negligence or willful actions, misuse or accident, or which have been modified or repaired 

by unauthorized persons; (ii) cracked or broken cabinets, or units damaged by excessive heat; (iii) damage to digital media 

players, CD’s or tape cassettes (if applicable); (iv) the cost of shipping this product to the Factory Service Center and its return 

to the owner.
This warranty is valid only in the United States of America and does not extend to owners of the product other than to the 

original purchaser. In no event will SDI or any of its affiliates, contractors, resellers, their officers, directors, shareholders, 

members or agents be liable to you or any third party for any consequential or incidental damages, any lost profits, actual, 

exemplary or punitive damages. (Some states do not allow limitations on implied warranties or exclusion of consequential 

damages, so these restrictions may not apply to you.) This warranty gives you specific legal rights, and you may also have 

other rights which vary from state to state.
Your acknowledgement and agreement to fully and completely abide by the above mentioned disclaimer of warranty is 

contractually binding to you upon your transfer of currency (money order, cashier's check, or credit card) for purchase of your

SDI product.

© 2015 SDI Technologies, Inc. All rights reserved

Questions? Visit www.ihome.com

or call 1-800-288-2792 Toll Free

iHome Products, a division of SDI Technologies Inc. (hereafter referred to as SDI), warrants this product to be free from defects 

in workmanship and materials, under normal use and conditions, for a period of one (1) year from the date of original 

purchase.
iHome Products, a division of SDI Technologies Inc. (hereafter referred to as SDI), warrants this product to be free from defects 

in workmanship and materials, under normal use and conditions, for a period of one (1) year from the date of original 

purchase. Should this product fail to function in a satisfactory manner, it is best to first return it to the store where it was originally 

purchased. Should this fail to resolve the matter and service still be required by reason of any defect or malfunction during 

the warranty period, SDI will repair or, at its discretion, replace this product without charge. This decision is subject to 

verification of the defect or malfunction upon delivery of this product to the Factory Service Center authorized by Customer 

Service.
If service is required, please call Customer Service at 1-800-288-2792 to obtain a Return Authorization Number and shipping 

instructions. 

Disclaimer of Warranty
NOTE:

 This warranty is valid only if the product is used for the purpose for which it was designed. It does not cover (i) products 

which have been damaged by negligence or willful actions, misuse or accident, or which have been modified or repaired 

by unauthorized persons; (ii) cracked or broken cabinets, or units damaged by excessive heat; (iii) damage to digital media 

players, CD’s or tape cassettes (if applicable); (iv) the cost of shipping this product to the Factory Service Center and its return 

to the owner.
This warranty is valid only in the United States of America and does not extend to owners of the product other than to the 

original purchaser. In no event will SDI or any of its affiliates, contractors, resellers, their officers, directors, shareholders, 

members or agents be liable to you or any third party for any consequential or incidental damages, any lost profits, actual, 

exemplary or punitive damages. (Some states do not allow limitations on implied warranties or exclusion of consequential 

damages, so these restrictions may not apply to you.) This warranty gives you specific legal rights, and you may also have 

other rights which vary from state to state.
Your acknowledgement and agreement to fully and completely abide by the above mentioned disclaimer of warranty is 

contractually binding to you upon your transfer of currency (money order, cashier's check, or credit card) for purchase of your

SDI product.

© 2015 SDI Technologies, Inc. All rights reserved

Questions? Visit www.ihome.com

or call 1-800-288-2792 Toll Free

Limited 1 Year Warranty

iBT70 EN-IB -
Size: 214mm x 336mm
Printing color: Black
April 09
100gsm2 WF (

書紙)

9

Consumer Product Safety Guide

8

When used in the directed manner, this unit has been designed and manufactured to ensure 

your personal safety.  However, improper use can result in potential electrical shock or fire 

hazards. Please read all safety and operating instructions carefully before installation and use, 

and keep these instructions handy for future reference. Take special note of all warnings listed 

in these instructions and on the unit. 
1.

Water and Moisture

 – DO NOT immerse unit in water. Make sure the seal and surrounding 

surfaces are completely dry before opening seal to prevent moisture from damaging the

internal electronics. Keep seal free of dirt, sand, or other objects that can interfere with proper 

sealing. If for any reason the seal is not making a tight seal, water may enter the unit.

2.

Ventilation

 – The unit should be situated so that its location or position does not interfere

with its proper ventilation. For example, it should not be situated on a bed, sofa, rug or

similar surface that may block ventilation openings.

3.

Heat

 – The unit should be situated away from heat sources such as radiators, heat registers, 

stoves or other appliances (including amplifiers) that produce heat.

4.

Power Sources

 – The unit should be connected to a power supply only of the type described 

in the operating instructions or as marked on the appliance.

5.

Cleaning

 – The unit should be cleaned only using a warm damp cloth. Do not use solvents, 

etc.

6.

Objects and Liquid Entry

 – Care should be taken so that objects do not fall and liquids are 

not spilled into any openings or vents located on the product.

7.

Attachments

 – Do not use attachments not recommended by the product manufacturer.

8. L

ightning and Power Surge Protection

 – Unplug the unit from the wall socket and disconnect

the antenna or cable system during a lightning storm or when it is left unattended and unused 

for long periods of time. This will prevent damage to the product due to lightning and

power-line surges.

9.

Overloading

 – Do not overload wall sockets, extension cords, or integral convenience

receptacles as this can result in a risk of fire or electric shock.

10. 

Damage Requiring Service

 – The unit should be serviced by qualified service personnel

when:
A. the power supply cable or plug has been damaged.
B. objects have fallen into or liquid has been spilled into the enclosure.
C. 

the unit has been exposed to rain.

D. the unit has been dropped or the enclosure damaged.
E. the unit exhibits a marked change in performance or does not operate normally.

12. 

Periods of Nonuse

 – If the unit is to be left unused for an extended period of time, such as

a month or longer, fully charge the unit before storing.

13. 

Servicing

 – The user should not attempt to service the unit beyond those methods described 

in the user’s operating instructions.  Service methods not covered in the operating instructions 

should be referred to qualified service personnel.

Questions? Visit www.ihome.com

or call 1-800-288-2792 Toll Free

IMPORTANT SAFETY INSTRUCTIONS

Internal Rechargeable Lithium-ion Battery 

This device uses an internal rechargeable lithium-ion battery that should last the lifetime of the device.  If you 

suspect your battery may be dead, try charging it several times. If the battery does not recharge, please contact 
us for repair information. 

WARNING/DISPOSAL OF UNIT

Please do NOT attempt to change the battery yourself. If the battery has died and you do not want us to replace 
your battery, you should follow the disposal instructions below:
•  Never dispose of used batteries/electronics with ordinary solid wastes, since they contain toxic substances. 
•  Always dispose of used batteries/electronics in accordance with the prevailing community regulations that apply 

to the disposal of batteries/electronics. If there are no local regulations concerning battery/electronics disposal, 
please dispose of the device in a waste bin for electronic devices.

•  Many electronics retailers now recycle batteries and other electronic components at no charge.  Check to see 

which ones in your area do so.

CAUTION

The battery used in this device may present a risk of fire, explosion or chemical burn if 

mistreated

•  Never use or charge the battery if it appears to be leaking, discolored, deformed, or in any way abnormal.
•  Never disassemble the unit or attempt to remove battery as that could cause leakage of alkaline solution or other 

electrolytic substance.

•  Always confirm that the temperature is 5°C – 35° C (41° - 95° Fahrenheit) before you charge the battery. 

Leakage or deterioration of the battery may occur if this warning is not heeded.

•  Never expose the battery to any liquid.
•  Never expose the battery to excessive heat such as direct sunlight or fire. Never use the battery pack in an 

unventilated vehicle where excessive internal temperatures may be encountered.

•  Always keep the battery out of the reach of infants and small children.

Introduction

iBT70-150409-A (EN) 

                          

Printed in China

Color Changing Rechargeable

Bluetooth Speaker 

with Speakerphone

instruction manual

Model: iBT70

CHARGE

BEFORE

USE

iBT70

FCC Information

This device complies with Part 15 of the FCC Rules, operation is subject to the following two 

conditions: (1) This device may not cause harmful interference, and (2) this device must accept any 

interference received, including interference that may cause undesired operation.

FCC Radiation Exposure Statement

This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled 

environment. 

•  Warning: Changes or modifications to this unit not expressly approved by the party responsible 

for compliance could void the user’s authority to operate the equipment.

• NOTE: This equipment has been tested and found to comply with the limits for a Class B

digital device, pursuant to Part 15 of the FCC Rules.

These limits are designed to provide reasonable protection against harmful interference in a 

residential installation. This equipment generates, uses and can radiate radio frequency energy 

and, if not installed and used in accordance with the instructions, may cause harmful interference 

to radio communications.

However, there is no guarantee that interference will not occur in a particular installation. If this 

equipment does cause harmful interference to radio or television reception, which can be determined 

by turning the equipment off and on, the user is encouraged to try to correct the interference by 

one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to which the receiver is

connected.

• Consult the dealer or an experienced radio/TV technician for help.

CAN ICES-3 (B)/NMB-3(B)

Canada Statement

This device complies with Industry Canada’s licence-exempt RSSs. Operation is subject to the 

following two conditions: 

(1) This device may not cause interference; and

(2) This device must accept any interference, including interference that may cause undesired

operation of the device.

Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux appareils radio 

exempts de licence. L’exploitation est autorisée aux deux conditions suivantes : 

(1) l’appareil ne doit pas produire de brouillage; 

(2) l’utilisateur de l’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage 

est susceptible d’en compromettre le fonctionnement. 

The device meets the exemption from the routine evaluation limits in section 2.5 of RSS 102 and 

compliance with RSS-102 RF exposure, users can obtain Canadian information on RF exposure 

and compliance.

Le dispositif rencontre l'exemption des limites courantes d'évaluation dans la section 2.5 de RSS 

102 et la conformité à l'exposition de RSS-102 rf, utilisateurs peut obtenir l'information canadienne 

sur l'exposition et la conformité de rf.

FCC ID: EMOIBT70

IC: 986B-IBT70

Declaration ID D024962

Summary of Contents for iBT70

















Reviews: