background image

iHome Products, a division of SDI Technologies Inc. (hereafter referred to as SDI), warrants this product to be free from defects 

in workmanship and materials, under normal use and conditions, for a period of one (1) year from the date of original 

purchase. Should this product fail to function in a satisfactory manner, it is best to first return it to the store where it was originally 

purchased. Should this fail to resolve the matter and service still be required by reason of any defect or malfunction during 

the warranty period, SDI will repair or, at its discretion, replace this product without charge. This decision is subject to 

verification of the defect or malfunction upon delivery of this product to the Factory Service Center authorized by Customer 

Service.
If service is required, please call Customer Service at 1-800-288-2792 to obtain a Return Authorization Number and shipping 

instructions. 

Disclaimer of Warranty
NOTE:

 This warranty is valid only if the product is used for the purpose for which it was designed. It does not cover (i) products 

which have been damaged by negligence or willful actions, misuse or accident, or which have been modified or repaired 

by unauthorized persons; (ii) cracked or broken cabinets, or units damaged by excessive heat; (iii) damage to digital media 

players, CD’s or tape cassettes (if applicable); (iv) the cost of shipping this product to the Factory Service Center and its return 

to the owner.
This warranty is valid only in the United States of America and does not extend to owners of the product other than to the 

original purchaser. In no event will SDI or any of its affiliates, contractors, resellers, their officers, directors, shareholders, 

members or agents be liable to you or any third party for any consequential or incidental damages, any lost profits, actual, 

exemplary or punitive damages. (Some states do not allow limitations on implied warranties or exclusion of consequential 

damages, so these restrictions may not apply to you.) This warranty gives you specific legal rights, and you may also have 

other rights which vary from state to state.
Your acknowledgement and agreement to fully and completely abide by the above mentioned disclaimer of warranty is 

contractually binding to you upon your transfer of currency (money order, cashier's check, or credit card) for purchase of your 

SDI product.

© 2015 SDI Technologies, Inc. All rights reserved

Questions? Visit www.ihome.com

or call 1-800-288-2792 Toll Free

iHome Products, a division of SDI Technologies Inc. (hereafter referred to as SDI), warrants this product to be free from defects 

in workmanship and materials, under normal use and conditions, for a period of one (1) year from the date of original 

purchase. Should this product fail to function in a satisfactory manner, it is best to first return it to the store where it was originally 

purchased. Should this fail to resolve the matter and service still be required by reason of any defect or malfunction during 

the warranty period, SDI will repair or, at its discretion, replace this product without charge. This decision is subject to 

verification of the defect or malfunction upon delivery of this product to the Factory Service Center authorized by Customer 

Service.
If service is required, please call Customer Service at 1-800-288-2792 to obtain a Return Authorization Number and shipping 

instructions. 

Disclaimer of Warranty
NOTE:

 This warranty is valid only if the product is used for the purpose for which it was designed. It does not cover (i) products 

which have been damaged by negligence or willful actions, misuse or accident, or which have been modified or repaired 

by unauthorized persons; (ii) cracked or broken cabinets, or units damaged by excessive heat; (iii) damage to digital media 

players, CD’s or tape cassettes (if applicable); (iv) the cost of shipping this product to the Factory Service Center and its return 

to the owner.
This warranty is valid only in the United States of America and does not extend to owners of the product other than to the 

original purchaser. In no event will SDI or any of its affiliates, contractors, resellers, their officers, directors, shareholders, 

members or agents be liable to you or any third party for any consequential or incidental damages, any lost profits, actual, 

exemplary or punitive damages. (Some states do not allow limitations on implied warranties or exclusion of consequential 

damages, so these restrictions may not apply to you.) This warranty gives you specific legal rights, and you may also have 

other rights which vary from state to state.
Your acknowledgement and agreement to fully and completely abide by the above mentioned disclaimer of warranty is 

contractually binding to you upon your transfer of currency (money order, cashier's check, or credit card) for purchase of your 

SDI product.

© 2015 SDI Technologies, Inc. All rights reserved

Questions? Visit www.ihome.com

or call 1-800-288-2792 Toll Free

Limited 1 Year Warranty

iBT15 EN-IB -

Size: 214mm x 336mm

Printing color: Black

Jan 09, 2015

100gsm2 WF (

書紙)

9

Consumer Product Safety Guide

8

When used in the directed manner, this unit has been designed and manufactured to ensure your personal 
safety.  However, improper use can result in potential electrical shock or fire hazards. Please read all safety 
and operating instructions carefully before installation and use, and keep these instructions handy for future 
reference. Take special note of all warnings listed in these instructions and on the unit. 
1.

Water and Moisture

 – DO NOT immerse unit in water. Make sure the seal and surrounding surfaces 

are completely dry before opening seal to prevent moisture from damaging the internal electronics.

Keep seal free of dirt, sand, or other objects that can interfere with proper sealing. If for any reason

the seal is not making a tight seal, water may enter the unit.

2.

Ventilation

– The unit should be situated so that its location or position does not interfere with its proper 

ventilation. For example, it should not be situated on a bed, sofa, rug or similar surface that may block 
ventilation openings.

3.

Heat

 – The unit should be situated away from heat sources such as radiators, heat registers, stoves or 

other appliances (including amplifiers) that produce heat.

4.

Power Sources

 – The unit should be connected to a power supply only of the type described in the

operating instructions or as marked on the appliance.

5.

Cleaning

 – The unit should be cleaned only using a warm damp cloth. Do not use solvents, etc.

6.

Objects and Liquid Entry

 – Care should be taken so that objects do not fall and liquids are not spilled 

into any openings or vents located on the product.

7.

Attachments

 – Do not use attachments not recommended by the product manufacturer.

8. L

ightning and Power Surge Protection

 – Unplug the unit from the wall socket and disconnect the

antenna or cable system during a lightning storm or when it is left unattended and unused for long
periods of time. This will prevent damage to the product due to lightning and power-line surges.

9. 

Overloading

 – Do not overload wall sockets, extension cords, or integral convenience receptacles as 

this can result in a risk of fire or electric shock.

10. 

Damage Requiring Service

 – The unit should be serviced by qualified service personnel when:

A. the power supply cable or plug has been damaged.
B. objects have fallen into or liquid has been spilled into the enclosure.
C. the unit has been exposed to rain.
D. the unit has been dropped or the enclosure damaged.
E. the unit exhibits a marked change in performance or does not operate normally.

12. 

Periods of Nonuse

 – If the unit is to be left unused for an extended period of time, such as a month

or longer, fully charge the unit before storing.

13. 

Servicing

 – The user should not attempt to service the unit beyond those methods described in the

user’s operating instructions.  Service methods not covered in the operating instructions should be
referred to qualified service personnel.

Questions? Visit www.ihome.com

or call 1-800-288-2792 Toll Free

IMPORTANT SAFETY INSTRUCTIONS

Internal Rechargeable Lithium-ion Battery 

This device uses an internal rechargeable lithium-ion battery that should last the lifetime of the device.  If you 

suspect your battery may be dead, try charging it several times. If the battery does not recharge, please contact 

us for repair information. 

WARNING/DISPOSAL OF UNIT

Please do NOT attempt to change the battery yourself. If the battery has died and you do not want us to replace 

your battery, you should follow the disposal instructions below:

•  Never dispose of used batteries/electronics with ordinary solid wastes, since they contain toxic substances. 

•  Always dispose of used batteries/electronics in accordance with the prevailing community regulations that apply 

to the disposal of batteries/electronics. If there are no local regulations concerning battery/electronics disposal, 

please dispose of the device in a waste bin for electronic devices.

•  Many electronics retailers now recycle batteries and other electronic components at no charge.  Check to see 

which ones in your area do so.

CAUTION

The battery used in this device may present a risk of fire, explosion or chemical burn if 

mistreated

•  Never use or charge the battery if it appears to be leaking, discolored, deformed, or in any way abnormal.

•  Never disassemble the unit or attempt to remove battery as that could cause leakage of alkaline solution or other 

electrolytic substance.

•  Always confirm that the temperature is 5°C – 35° C (41° - 95° Fahrenheit) before you charge the battery. 

Leakage or deterioration of the battery may occur if this warning is not heeded.

•  Never expose the battery to any liquid.

•  Never expose the battery to excessive heat such as direct sunlight or fire. Never use the battery pack in an 

unventilated vehicle where excessive internal temperatures may be encountered.

•  Always keep the battery out of the reach of infants and small children.

iBT15-150407-B (EN) 

Printed in China

iBT15 EN-IB

Size: 214mm x 336mm

Printing color: Black

Jan 09, 2015

100gsm2 WF (

書紙)

Summary of Contents for iBT15

















Reviews: