Setting the Clock
The unit features a Daylight Saving Time (DST) Switch on the back of the unit to quickly add or subtract an
hour to account for Daylight Saving Time and Standard Time differences. Before setting the time, move the
DST Switch
to
+1
if Daylight Saving Time is in effect or to
-1
if Standard Time is in effect.
1. Press and hold the
Clock Button
for 2 seconds until the clock display flashes and a beep sounds.
2. Press the
–
or
+ Buttons
to adjust the clock to the current time (hold for rapid setting).
Make sure you set the correct AM/PM time. The AM and PM indicators appear to the left of the display.
3. To toggle the clock display between standard 12 hour time and 24 hour (“military”) time display,
press the
Button
during time setting while time digits are flashing.
4. Press the
Clock Button
to confirm the time and exit clock setting mode. 2 beeps will confirm clock setting
is complete.
Using the
iBN18
8
P9
