FRONT
9
»
Connect the built-in Aux-in cable on the back of the iAV2v2 to the Aux jack of your
Echo device.
»
You can now ask Alexa to access all the functions of your Echo device and hear the
audio through the iAV2v2.
VOLUME CONTROL
»
For Echo Dot:
Adjust the volume on the Dot to your desired level.
»
For Echo Input:
Ask Alexa to adjust the volume to your desired level.
“Alexa, stop”
“Alexa, set volume to 5”
“Alexa, mute” or “Alexa, unmute”
“Alexa, turn up/down the volume”
»
TIP: You can also use the Alexa app to adjust the volume on your Amazon Echo devices.
Troubleshooting for Low Audio:
»
Make sure that the 3.5mm audio cable is fully inserted into the Echo Dot.
»
Make sure that you raise the volume on your Echo Dot.
»
Make sure that you raise the volume on your phone.
Low Battery
Indicator
When lit, backup
battery needs
replacing
PM
Indicator
When lit,
time is PM
Contact Us: 1•800•288•2792
For full warranty and full instructions
visit: www.ihome.com/support
THE DISPLAY
Amazon, Alexa, Echo Dot and all
related logos are trademarks of
Amazon.com, Inc. or its affiliates.
Playing Audio On Your Echo Device
»
NOTE: Backup battery only maintains clock settings
during a power interruption. Unit does NOT operate on battery.
DC 12V, 1.5A
OR
9
DC 12V, 1.5A
Bedside Speaker System
Model: iAV2v2
for Amazon Echo Devices
QUICK START GUIDE
»
iAV2v2
»
USB cable
»
Universal voltage adapter
»
TIP: Press the + and – Buttons on iAV2v2 together during clock setting to switch
display from standard 12 hour to 24 hour display.
1 Clock Setting Button
Press and hold
for 2 seconds
until clock starts flashing
to start clock setting. Adjust
with +/– Buttons. Press again
to complete clock setting.
NOTE: Alexa cannot set clock
2/3 +/– Setting Buttons
Press and release to adjust
clock during setting
(hold for rapid adjust)
4 Dimmer Button
Press and release to adjust
display brightness from high
to off.
5 Backup Battery Compartment
Unscrew door with Phillips
screwdriver. Insert 1 CR2450
battery as shown to maintain
clock setting during power
interruption.
6/7 AC adapter/DC Jack
Connect the included
AC adapter to the DC jack
located on the back of the
unit and connect the other
end to a working wall outlet.
8/10 USB Charging Ports
Connect a standard USB
cable (not included) to
charge mobile devices.
9 Hardwired AUX cable
BOTTOM
TOP
Amazon Echo Device Dock
»
Docking adapter
www.ihome.com Toll Free: 1-800-288-2792
Made in China Patents: www.ihome.com/patents
iAV2v2
MODEL
iAV2v2-A-A
Service Number:
DC 3V, CR2450 x 1
Clock Backup:
DC 12V, 1.5A
AC Adaptor:
Designed and Engineered in the USA
Made for the Amazon Dot (2nd Gen)
Manufactured & Serviced by SDI Technologies Inc.
RESETRESET
TESTTEST
Printed in China
iAV2v2-180719-A
For warranty and full instructions
visit: www.ihome.com/support
© 2018 SDI Technologies, Inc. All rights reserved.
Questions? Visit www.ihome.com
or call 1-800-288-2792 Toll Free
DC 12V, 1.5A
WHICH AMAZON ECHO DEVICE DO YOU HAVE?
Docking Your Amazon Echo Dot
»
Remove the included Echo Input adapter. Align the rear of the Echo Dot (the side with
the USB port and Aux Jack) with the opening in the iAV2v2 dock well and place with
the ports facing the back.
Powering Your Amazon Echo Device
Docking Your Amazon Echo Input
»
Separate the two-piece Echo Input adapter, then place the Echo Input between the top
and bottom adapters, leaving the connector ports accessible on the back. Close the
adapter by lining up the printed arrows. Insert into the iAV2v2 dock as shown above, and
gently push into place.
8
10
10
8
BACK
FRONT
DC 12V, 1.5A
RESETRESET
TESTTEST
OR
6
7
6
1
2
3
4
5
10
9
8
7
»
For Echo Dot:
Connect the included USB cable to USB Charge Port on the iAV2v2.
»
For Echo Input:
Connect the USB cable to USB Charge Port on the iAV2v2.
»
Connect the other end of the cable to the USB port on your Echo device.
»
Connect the AC power adapter to the DC jack.
