6
Setting Up the iA63
Setting the Time manually
1. Slide the DST (Daylight Saving Time) Switch located on the back of the unit to +1 to add an hour (Spring) or to -1 to subtract
an hour (Fall) to adjust for daylight saving time or standard time.
2. Press and hold the
Time Set/Sync Button
located at the back of the unit until the time flashes on the display and the unit
beeps once.
3. Press the
+
or
- Button
to set the correct time (hold for faster setting). Remember to set the correct AM or PM time. The
PM Indicator appears to the left of the time display; there is no AM indicator.
4. If desired, press the
button
during Time setting to toggle the clock display format to 12 hours or 24 hours.
5. When the correct time is displayed, press the
Time Set Button
again (or no button within 10 seconds) to exit the time
setting mode.
NOTE:
You can also adjust settings on the iA63 via the iHome+Sleep app. To do so, press and hold the
Button
when the iHome+Sleep app is open and in view. See the iHome+Sleep Start Guide for more information.
Using the Alarms
iA63 lets you wake to FM radio, iPhone/iPod or buzzer alarm and to adjust the alarm volume.
Setting the Alarms
1. Press and hold the
Button
until the alarm time flashes on the display then release. Press the
+
or
- Button
to set
the alarm time (hold for faster setting). Remember to set the correct AM or PM time.
2. Press the
Button
again to confirm the set alarm time, then press the
+
or
- Button
to select an alarm source to
wake to: iPod, Radio (the currently tuned radio frequency appears on the display) or Buzzer.
For wake to iPod:
select iPod to wake to a docked iPhone/iPod. If the unit does not detect an iPhone/iPod at the set
alarm time, the iA63 will default to the buzzer alarm. The alarm cycle lasts for one hour; make sure you have enough music
on your iPhone/iPod to last that long.
For wake to radio:
You can wake to a different preset station. After selecting Radio as the wake to source, press
the
Button
as needed to cycle to the desired preset station (see Listening to Radio on page 8 for details on
setting radio stations and presets).
3. Press the
Button
again, then press the
+
or
- Button
to set the alarm volume.
4. Press the
Button
again (or no button within 10 seconds) to exit the alarm setting mode. 2 beeps will confirm the
alarm is set.The alarm is armed once set, indicated by the alarm icon on the display.
Arming and Disarming Alarm (Turn Alarm Function On and Off)
1. Press the
Button
at any time to arm the alarm. The alarm icon will appear and the currently set alarm time will
appear briefly on the display.
2. Press the
Button
again to disarm the alarm (the alarm icon will disappear).
