IHI IC50, Operation Manual

Page: 21 / 104

SAFETY
IC50 ENG 1-11
WARNING SIGNS AND LABELS
There are several specific safety signs on your machine. Their exact location and
description of the hazard are reviewed in this section. Please take the time to familiarize
yourself with these safety signs.
Make sure that you can read all safety signs. Clean or replace these if you cannot read the
words or see the pictures. When cleaning the labels use a cloth, water and soap. Do not
use solvent, gasoline, etc.
You must replace a label if it is damaged, missing or cannot be read. If a label is on a part
that is replaced, make sure a new label is installed on the replaced part.
See your IHI dealer for new labels.
Where the warning Signs and Labels are stuck
Viewed from
direction of A
(Inside tool box)