iHealth PT1 User Manual Download Page 4

(2) Predict Mode

1. The thermometer provides Predict Mode for oral use. Simply 

press the button once to activate the thermometer, beep will 
sound when activated.

2. When “

” sign is flashing on the screen, place the probe tip 

well under the tongue and hold well.

3. A gentle beep will sound in 30 seconds when measurement is 

completed and the results will display on the screen.

(2) About product

BEEP~

Instruction for Use

(1) Measurement Procedures 

1. Place the probe tip well under the tongue. Place the sensor tip 

in areas marked with marked with “         ”. The mouth should 
remain closed during the measurement to ensure an accurate 
reading. Be careful not to bite the thermometer.

2. Hold the thermometer during the measurement to prevent 

moving.

1. The thermometer is a precise instrument. Please properly 

store in the protective case after use to prevent unnecessary 
damage.

2. DO NOT tread, or bend the thermometer, which may cause 

product damage.

3. Make sure the thermometer is not damaged from shock. If 

broken, DO NOT attempt to re-assemble.

4. Keep the thermometer out of reach of children. Small parts 

and packaging materials may cause a choking hazard.

5. DO NOT throw the thermometer and batteries into an open fire.
6. Remove the battery if the device will not be used for more 

than one month.

7. If you are allergic to plastic/ABS, please DO NOT use this 

device.

8. Expected service life: 5 years (battery excluded)
9. This device complies with part 15 of the FCC Rules. Operation 

is subject to the following two conditions: 

    (1) This device may not cause harmful interference, and
    (2) This device must accept any interference received, 

including interference that may cause undesired operation.

3

Summary of Contents for PT1











Reviews: