iHealth Neo, Instructions For Use Manual

Page: 61 / 210

b. Then the cuff will be slowly inflated. The blood pressure and pulse will be measured during
inflation. Inflation will stop as soon as the blood pressure and pulse rate have been calculated
and displayed on the screen. The result will be automatically stored in the memory, and all
results will be uploaded to the App automatically upon the next successful Bluetooth connection.
c. During measurement, you can press the START button to turn off the monitor manually.
d. After measurement, the monitor will turn off automatically after 60 seconds if no operation.
Alternatively, you can press the START button to turn off the monitor manually.
Note: Please consult a health care professional for interpretation of pressure measurements.
BLUETOOTH FUNCTION
Connect to iOS/Android Device via Bluetooth
a. Enable Bluetooth on your device.
b. Launch the iHealth MyVitals App from your device.
c. When a successful connection has been established, the Bluetooth indicator light will light up.
d. When sync is processing, the sync indicator will flash, when sync is finished,
The sync indicator lights up for 2 seconds and then light off.
Bluetooth connected Syncing Sync finished
Note: The monitor will turn off Bluetooth function to save power under battery low status (when
the monitor can no longer take blood pressure readings), and turn Bluetooth function on when
charger is plugged in.
8