7
/
16
z
When in charging mode, the charging status will be displayed on the LED screen. See the table below for
details.
Monitor Status
Status Indicator
Charging
battery/charge symbol flashing slow
Fully charged
battery/charge symbol steady
Battery charge <25%
battery/charge symbol flashing fast
Battery low
battery/charge symbol flashing fast
Do not change the battery. If the battery can no longer be charged, please contact Customer Service.
Overcharging the battery may reduce its lifetime.
Lithium battery replacement by inadequately trained personnel could result in a hazard such as a fire or explosion.
Do not plug or unplug the power cord into the electrical outlet with wet hands. If the AC adapter is abnormal,
please change the adapter.
Do not use the monitor while charging.
Do not use any other type of AC adapter as it may harm the monitor.
The monitor, cable, battery and cuff must be disposed of according to local regulations at
the end of their usage.
Note: The battery has limited charge cycles and may eventually need to replaced by an iHealth service provider.
Battery life and charge cycles vary by use and settings.
SET UP PROCEDURES
Download the Free iHealth App
Prior to first use, scan QR code and download the iHealth App. Follow the on-screen instructions to register and set up
your personal account.
Access the iHealth Cloud Account
Your iHealth account also gives you access to the secure iHealth cloud service.
Power on the Monitor
Connect the monitor to a USB port using the charging cable provided or press
button at least 2 seconds until the
LED screen displays all characters to power on the monitor at the first use.
ABPM SYNC AND SETUP
Bluetooth Function
The Bluetooth function is always on if the monitor has enough power. Only if the monitor is in low power
status(not enough power to take blood pressure readings), the Bluetooth function will be turned off until the
monitor has charged and have enough power.
Connect to iOS Device via Bluetooth
a. Enable Bluetooth on your iOS device.
b. Launch the iHealth App from your iOS device.
c. When a successful connection has been established, the Bluetooth indicator light will light up.
d.
When sync is processing, the sync indicator will flash , when sync is finished,
the sync indicator lights up
for 2 seconds and then light off.