iHealth
1/2" (1-2cm)
iHealth
ST
AR
T
1.Place your hand palm-side up in front of you on a flat surface such as a
desk or a table.
2.Sit comfortably with your feet flat on the floor without crossing your legs,
and remain still during measurement.
3.Applying the cuff or press the “START/STOP” button on your monitor.
4.Adjust the height of your wrist, the monitor will detect your wrist
position and the measurement will start ONLY when the correct position
is detected. When the position is correct, press "START/STOP" button
again to start measurement.
Wrist position too low Wrist position too high Wrist position good
5. Results will be shown on the blood pressure monitor display.
Sync Results Via
Bluetooth
Use
Bluetooth
to sync your readings to your iOS or Android device and
save data to the secure iHealth cloud.
