iHealth BG1S, Owner'S Manual

Page: 18 / 24

16
new vial of Test Strips.
4. Bring the system to a
room-temperature
environment and wait
approximately
30 minutes before
performing a new test.
The meter does not
respond, and red LED
lights up System suspend The meter will recover to
default state in 10s after
system suspend
automatically. Please wait
until the green LED
remains lit for 3sec
Red LED flash 3sec
after the test strip has
been inserted into the
meter Battery power is too low
for use.
repalce
the battery
Red LED lights up
30sec after the test
strip has been inserted
into the meter An error occur in testing
process Connect the meter to app
to get error message and
further information
Signs of potential physical and performance deterioration
If you encounter one of the following circumstances, stop using the meter and
contact iHealthlabs customer services
1. The device does not work; for example, the Android or iOS mobile device can’t
begin testing when the meter is connected with the Android or iOS mobile device
or when a test strip is inserted into the meter.
2. Discoloration of the meter casing or lancing device; for example, it is difficult to
read the labelling information.
3. Corrosion, crazing (any cracks), embrittlement, and/or cracking of the meter
casing or lancing device.
If you have questions or need assistance outside the operational days and times,
please contact your healthcare provider. If deterioration is observed, please stop
using and contact local customer services or place of purchase for assistance, or
toll free service hotline: 1-855-816-7705.
iHealth WIRELESS SMART GLUCO-MONITORING SYSTEM
SPECIFICATIONS
Technical specifications
1. Model: BG1S
2. Machine size: 2.38’’ × 1.
55
’’ × 0.63’’ (60.5mm ×
3
9.4mm × 16.1 mm)
3. Measuring method: Amperometric technology using glucose dehydrogenase
4. Result range: 50 mg/dL ~ 600 mg/dL (2.8 mmol/L ~ 33.3 mmol/L)
5. Power source: DC 3.0V（CR2032）
6. Wireless communication:
Bluetooth
V4.2 BLE Only Mode (EIRP: <3dBm)
Frequency Band: 2.402-2.480 GHz