GTB2 IH INDUCTION COOKER QUICK START INSTRUCTIONS UPDATED – Version 3
Thank
You
for your valued purchase of a GTB2 IH Induction cooker.
To start, please plug your GTB2 Induction cooker into a standard 3 pin wall outlet.
To switch ON:
To switch on, press the
ON OFF
button once.
You will hear a single beep and ‘
- - - -
‘ will display on the centre LDC panel.
Only the
ON OFF
light will display a red light.
To BOIL Water:
To BOIL water, press the
Water
button once.
The
Water
lcd will display a red light.
A1
will display on the LDC panel and you will hear a single beep.
The Induction cooker will start automatically.
This is a
PRESET FUNCTION
to boil water and no adjustment is necessary.
Press the
ON OFF
button once to stop the water function as soon as the water is boiling.
TIP: A STAINLESS STEEL STEAM KETTLE WORKS PERFECTLY TO BOIL WATER FOR COFFEE/TEA, ETC.
To FRY:
To FRY press the
FRY
button once.
270 (degrees) will display on the LDC panel and you will hear a single beep.
The
Fry
lcd will display a red light.
The
C(
o) indicator will light up in the centre panel.(degrees indicator).
Press the
UP
arrow to adjust temperature from 60 degrees to 270 degrees or to your preferred temperature.
Press the
DOWN
arrow to adjust temperature down to your preferred temperature or to 60 degrees.
The degrees range is 60, 80, 100, 120, 140, 160, 180, 200, 220 and 270.
TIP: TO FRY EGGS PERFECTLY, SET THE TEMPERATURE TO 80 DEGREES AND PLACE A LID ON THE PAN.
To use the HOTPOT function and/or to set Wattage:
Press the
Hotpot
button once
.
1300 (watts) will display on the LDC panel and you will hear a single beep.
The
Hotpot
lcd will display a red light.
The
W
(o) indicator will light up in the centre panel.(watts indicator)
Press the
UP
or
DOWN
arrows to adjust Wattage up or down from 120 watts to 2000 watts.
The wattage range is 120, 400, 800, 1000, 1200, 1300, 1500, 1600, 1800 and 2000.
Page: 2 (copyright) Paul Nipper - 2012 www.inductioncooker.co.za (click to view)
