igus motion Plastics D8-1, Manual

Page: 14 / 14

Service
D8-1_EN
– V1.0
14/14
6 Status and Error Messages
The red and green LED are indicating different status and error states.
LED Behaviour Description
Green Permanently on Enable signal applied - motor energised
Green Flashing Enable signal not applied - motor not energised
Red Permanently off No error
Red 1x flashing, off; permanently repeating Overcurrent or short circuit
Red 2x flashing, off; permanently repeating Overvoltage at V±
Red 3x flashing, off; permanently repeating Overtemperature motor control
Red 4x flashing, off; permanently repeating Missing motor winding
Red 5x flashing, off; permanently repeating Internal fault
7 Accessories
Mounting
DLE-TOPHAT-SET-1 Top-Hat rail mounting clip with matching screw
Connectors
D8-CONNECTOR-SET Complete set off all dryve D8-1 connector plugs
8 Service
Customer service
de-dryve@igus.net
+49 (0) 2203-9649-845
Technical support for igus dryve motor control systems
Videos/Tutorials
www.igus.eu/dryve/tutorial
Video guides explaining the functional range and the setup of the motor controller
Additional product videos
Website Motor Shop
http://www.igus.eu/motorshop
Motors, limit switches and other accessories available to purchase
Download data sheets for electrical drive technology
Website drylin drive technology
www.igus.eu/drivetechnology
Download data sheets of the mechanical drive technology
Ordering of axes, linear robots and accessories
Contact
www.igus.eu
info@igus.eu
+49 (0) 2203-9649-0
Imprint
All rights reserved:
igus
®
GmbH
Spicher Str. 1a
51147 Cologne, Germany
© 2021