Appendix A: Router Configuration
WARNING:
Do not lose your CD key password. It is required every time you “reset” your
iGuard either thru “About” section of the webpage, or via the manual reset
button. If you lose this password, you’ll have to contact your reseller for the
master password.
3. Once you have entered the necessary information for “Input Device Password”
and “Administrator authentication”, iGuard “Setup Wizard” will initiate to take you
through the installation.
4. Enter the necessary camera configurations. Choose the appropriate frequency
(Indoor 60 Hz, Indoor 50 Hz or Outdoor) to prevent flickering on the video feed.
Enter a name for the camera in the “Location” box to easily identify it.
5. Click “Next >” to configure the Network Connection.
“Obtain an IP address by DHCP”
41
