11
DISPLAY & FUNCTIONS
iGO TECHNICAL SUPPORT
(phone lines open Mon-Fri 9:00 am - 5:00 pm EST)
tel: 1 866 996 6686 email: [email protected]
YOU MUST ALWAYS WEAR AN APPROVED BICYCLE HELMET
WHEN RIDING AN ELECTRIC BIKE.
ERROR CODES
If an issue should occur with your iGO Elite ebike
an error code will appear on your display.
In the event of an error code, verify all electrical connections
1) at the wiring between the handlebars and the downtube of the bike, and
2) on the left chainstay, between the motor and the controller.
Error 04:
Throttle
Error 06:
Low Voltage Protection
Error 07:
High Voltage Protection
Error 08:
Hall Sensor
Error 09:
Phase Line
Error 10:
Controller Temperature
Error 12:
Current Sensor
Error 13:
Battery Temperature Sensor
Error 21:
Speed Sensor
Error 22:
BMS Communication
Error 30:
Communication
If error persists contact iGO Technical Support
