Ignition 2bright Pint TW200 IP User Manual Download Page 13

Page: 13 / 80

DANGER!
Danger for children
Ensure that plastic bags, packaging, etc. are disposed of properly and are not

within reach of babies and young children. Choking hazard!
Ensure that children do not detach any small parts (e.g. knobs or the like) from

the unit. They could swallow the pieces and choke!
Never let children unattended use electrical devices.

DANGER!
Electric shock caused by short-circuit
Always use proper ready-made insulated mains cabling (power cord). Do not

modify the mains cable. Failure to do so could result in electric shock/death or

fire. If in doubt, seek advice from a registered electrician.

Safety

Safety instructions

2bright Pint TW200 IP

LED PAR

Summary of Contents for 2bright Pint TW200 IP

















































































Search results

Summary of Contents for 2bright Pint TW200 IP

Reviews:

Related manuals for 2bright Pint TW200 IP

Brands by name

Popular brands

Ignition 2bright Pint TW200 IP, User Manual

Search results

Summary of Contents for 2bright Pint TW200 IP

Reviews:

Related manuals for 2bright Pint TW200 IP

Brands by name

Popular brands