IgniteNet SunSpot AC120, Quick Start Manual

Page: 3 / 7

– 3 –
Quick Start Guide
Mounting the AP on a wall
Mount the unit on a wall using the provided screws.
Mounting the AP on the ceiling
If the room is equipped with a suspended ceiling, the mounting plate provided in
the box can be used to attach the AP to the metal grid of the ceiling.
Wall Mounting
Drill holes in the wall at an horizontal distance of
116 mm from each other. This distance
corresponds to the distance between the
mounting holes on the back of the AP.
Use the screw plugs and screws provided in the
box of the AP or verify that the size of the head of
the screws is small enough to fit through the
mounting holes (< 7 mm).
Screw the screws in the wall until they stick out
just enough to enter the mounting holes.
Adjust the AP on the screws and then down in its
final position.
2 2
1
1
1
1
2
1
1
2
2
3
Suspended Ceiling Mounting
Press the retention clips of the mounting plate
against the ceiling bar.
Rotate the plate until the bar snaps into place.
Slide the rails on the back of the AP along the
sides of the ceiling mounting plate.
1
2
3