Ignite Mini, User Manual, Page: 32 / 44

Scooterpac Ignite Mini | User Manual 32
10 Maintenance
10.1 Replacing Bulbs
LEDs are energy efficient and long lasting however they may eventually require replacement. LED bulbs can be purchased
from the dealer that supplied your Ignite Mini. Replacing bulbs should only be completed by an approved Scooterpac
dealer, as it involves disassembling units that must be resealed to the original manufacturing specification.
10.2 Battery Care
The battery assembly in your Ignite Mini should not require any maintenance on a day-to-day basis, however access may
be required. The batteries are located under the seat, protected by a plastic shroud – secured by one thumb screw.
To access the batteries, the seat must be removed. Before removing the seat, disconnect both heated seat connections.
The seat can then be removed by pulling directly upwards. This can be done by grasping the black lever on the right-hand
side underneath the seat & pulling it towards the front of the vehicle.
Once the maintenance has been completed, ensure that the thumb screw is used to refit the battery cover securely,
without crushing or bending any wires. Replace the seat ensuring its locked in place and test the fitting for tightness to
avoid danger to any user. Reconnect the heated seat connections.