ESK03
8
SAFETY INSTRUCTIONS
1.
In Australia, each state and territory has specific regulations that may apply to this
product, including where you can legally use such products and if you need to register
them with your local road traffic authority. Please be sure to familiarise yourself with
these prior to using this product.
2. The ESK02 electric skateboard is not a toy, should be treated with appropriate caution.
Ensure that you use the board in a safe & appropriate environment, and always wear
the required safety gear outline in point 3 below.
3.
Safety Gear: It is required that full safety gear is worn when operating this skateboard.
An Australian standard skateboard helmet, elbow pads, knee pads, and gloves are all
required before riding.
4.
Appropriate footwear: Flipflops/Thongs/Jandals or any open toe footwear are not
suitable when in operating this skateboard.
5. This skateboard is designed for anyone over 10 years old. Children under the age
of 16 must be accompanied by an adult when opperating this skateboard.
6. This skateboard is designed to carry one rider only, it is engineered to support a
maximum weight capacity of 100kg.
7. The board is designed to drive on flat and paved surfaces. Avoid driving on sand,
gravel, mud, rugged or open ground. Do not drive on slippery ground, such as snow,
ice or oil.
8.
Keep fingers, hairs, and clothing away from motors, wheels and any moving parts.
9. Do not open, modify or tamper with battery housing.
Aquilia Group Pty Ltd. shall not be liable for any financial losses, physical injuries,
accidents, legal disputes and other interest conflicts resulted from actions that violate
the user instruction manual.
PRODUCT WARRANTY
This product & controller is covered under warranty for regular use for 12 months.
NOTE:
Please use this skateboard appropriately, any damage caused by abnormal use
will not be covered under the standard warranty, this inlcudes:
a. If the skateboard is not properly maintained and repaired per the instruction manual.
b. The use of the ESK03 Skateboard in stunts or at skate parks that results in
damage or malfunction.
c.
Any disassembly, modifications, or repairs using non-factory parts.
d. Incomplete label or part number mismatch.
e. Commercial rental.
f.
Injury caused by mistakes, traffic accidents, or accidental collisions.
g. Storing the skateboard in direct sunlight.
h. Submerging the skateboard submerged in more than 5cm of water.
